Home Contact Us Sitemap Webmail
  November 15, 2018

Department of Mechanical Engineering

 

INTRODUCTION FACULTY LABORATORY LIBRARY ACTIVITIES PLACEMENT REGULATIONS PUBLICATIONS EVENTS
                                           

JOURNAL PUBLICATIONS:

    2017-18:

  • Pitchipoo P, Venkumar P.,Rajakarunakaran S., and Ragavan R., (2018), “Decision model for supplier evaluation and selection in process industry: A hybrid DEA approach”, International Journal of Industrial Engineering: Theory, Applications and Practice, Vol. 25, No. 2, pp. 186-199 (IF: 0.537).

  • Pitchipoo P, Maniram Kumar A., Rajakarunakaran S., and Vimalesan R., (2018), “Fuzzy based risk prioritisation in an auto LPG dispensing station”, Safety Science, Vol. 101, January 2018, pp. 231–247(IF: 2.246).

  • Pitchipoo P, Vincent D.S., Rajini N., and Rajakarunakaran S., (2018), “Reduction of Blind Spots in Heavy Transport Vehicles through the Optimization of Driver Seat Design”, International Journal of Computer Aided Engineering and Technology , Vol. 10, No.1/ 2, pp. 3-14.

  • Muthiah A,and Rajkumar R., (2018),“Production Scheduling Problem Solving With Sequence Dependent Set-Up Times By Using Genetic Algorithm", PerspectivasemCiencia da Informacao, v.22, sp.6, p93-111.

  • Muthiah A,and Rajkumar R., (2017),“A novel algorithm for solving job-shop scheduling problem”, Mechanika, Volume 23(4), pp. 610-616 (IF: 0.382).

  • 2016-17:

  • Muthiah A., Pitchipoo P.,Rajkumar R., (2016),“Analyses of Ceramic Coating on the Exhaust Valve of Diesel Engine”, International Journal of Printing, Packaging & Allied Sciences, Vol. 4, No. 1, pp. 179-189 .

  • Pitchipoo P.,,Vincent D.S., and Rajakarunakaran S.,“Hybrid Optimization Model for Blind Spot Reduction in Heavy Vehicles”, International Journal of Computer Aided Engineering and Technology , Vol. 9, No. 2, pp. 145-153.

  • Muthiah A.,,and Rajkumar R.,“Scheduling Problem Solving Using Genetic and Greedy Algorithms”, International Journal of Computer Aided Engineering and Technology , Vol. 9, No. 2, pp. 207-217.

  • M. Suresh, R. MebySelvaraj, K. Rajkumarand V.M. Saravanan,“Optimization of cutting parameters in CNC turning of EN-19 using Tungsten carbide”, International Journal of Computer Aided Engineering and Technology , Vol. 9, No. 2, pp. 218-228.

  • R. MebySelvaraj, P. Ebenezer Sathish Paul, G. Uthaya Kumar and M. Ramesh, ,“Optimization of swept angles for airfoil NACA 6-series”, International Journal of Computer Aided Engineering and Technology , Vol. 9, No. 2, pp. 29-240.

  • K.Ganesanand S. Saravanan, “Mechanical Testing of Eco friendly Natural Reinforced Composite Material” International Journal of Computer Aided Engineering and Technology, Vol. 9, No. 2, pp. 241-250.

  • Pitchipoo P., Ragavan R.,and Rajakarunakaran S., (2016) Sourcing Selection Using Hybrid Fuzzy AHP for a Packaging Industry”, International Journal of Printing, Packaging & Allied Sciences, Vol. 4, No. 1, pp. 190-199.

  • Dinagaran R., Santhosh Kumar A., Selvakumar N., and K.Jeyasubramanian, (2016), “Tribological Behavior of Nano Ferrofluid in AISI 1005 Steel”, International Journal of Advance Research and Innovative Ideas in Education, Volume 2, Issue 2, pp. e 193-202.

  • 2015-16:

  • Pitchipoo P., Jebakani D., Krishnaveni A., and Jeyakumar K., (2016), “Hybrid Optimization of Gas Metal Arc Welding Process Parameters for Maximizing the Mechanical Properties”, International Journal of Advanced Engineering Technology , Volume VII, Issue III, 92-101.

  • Pitchipoo P., Krishnaveni A., Jebakani D., and Jeyakumar K., (2016), “Turning Parameters Optimization Using COPRAS – Taguchi Technique" International Journal of Advanced Engineering Technology, Vol. 7, No. 2, pp. 463-468.

  • Pitchipoo P., Mayandi K., Rajini N., Arumugaprabu V., Vishnudev PK., Vetrivel M and Vignesh K., (2015), “Effect of Alkali Treatment on Tensile and Physicochemical Characterization of CissusQuadrangularis Fiber” Applied Mechanics and Materials 813, 172-178

  • Pitchipoo P., Mayandi K., Rajini N.,WinowlinJappes JT. And Siva I., (2015) “Mechanical performance of Cissusquadrangularis/polyester composite”, Materials Today Communications, Volume 4, pp. 222–232.

  • Pitchipoo P., Vincent D.S.,and Rajakarunakaran S., "Development of Fuzzy Based Intelligent Decision Model to Optimize the Blind Spots in Heavy Transport Vehicles”, Traffic & Transportation, Vol. 28, No. 1, pp. 1-10.(IF: 0.292).

  • Pitchipoo P., Mayandi K., Rajini N., and VaradaRajulu A., (2015) “Extraction and Characterization of New Natural Lingo-Cellulosic Fiber CyperusPangorei” International Journal of Polymer Analysis and Characterization, Vol. 21, No. 2, pp. 175-183(IF: 1.26).

  • Pitchipoo P.,Saravanan S., (2015) "Optimization of GMAW Parameters to Improve the Mechanical Properties", Applied Mechanics and Materials, Vols. 813-814, pp. 456-461.

  • Muthiah A.,and Rajkumar R., (2016), “A Zestful Combination of ABC with GA for Quenching of Job Shop Scheduling Problems" International Journal of Advanced Engineering Technology, Vol. 7, No. 2 .

  • Muthiah A.,and Rajkumar R., (2016), “Production Scheduling Problem Solving With Sequence Dependent Set-Up Times By Using Genetic Algorithm " International Journal of Applied Engineering Research, Volume 10, Number 12 (2015) pp. 32433-32450.

  • D.Sundarrajan, C.Gururaj and M.Sankarasubramanian,, “Mechanical and Tribological Study on Aluminum based Composites Reinforced with Cotton Shell Ash, Vol. 10, No. 9, pp.7803-7809.

  • Muthiah A., and Rajkumar R., (2016), Minimizing Makespan in Job Shop Scheduling Problem Using Genetic Algorithm, Applied Mechanics and Materials Vols. 813-814 (2015) pp 1183-1187.

  • Muthiah A., and Ganesan K., (2015), “Production scheduling problem solving using genetic and greedy algorithms with sequence dependent set-up times" Journal of Manufacturing Engineering, September 2015, Vol. 10, Issue. 3, pp 166-170.

  • K. Ganesan., Y. Kumarasamy., and C. Kailasanathan., (2015), “Analysis of Composite Leaf Spring Enhanced With Nanoparticles, Carbon – Science and Technology, Vol. 7, No. 4, pp. 34-42.

  • P. Ebenezer Sathish Paul., G. Uthaya Kumar., S.Durairaj and D. Sundarrajan (2016), Design and Analysis of Industrial Ball Valve using Computational Fluid Dynamics, International Journal of Recent Trends in Mechanical Engineering, Volume 3, Issue.1, pp 1- 6.

  • 2014-15:

  • Pitchipoo P., Vincent D.S., Rajini N. and Rajakarunakaran S., (2015) “Fuzzy based optimization to reduce the blind spots in heavy transport vehicles”, International Journal of Vehicle Structures & Systems, 7(4), 136-140.

  • Pitchipoo P., Mayandi K., Rajini N., Sreenivasan V.S. and WinowlinJappes J.T., (2015) “A comparative study on characterizations of Cissus quadrangularis and Phoenix reclinata natural fibres” Journal of Reinforced Plastics and Composites, Vol. 34, No. 4, pp. 269 – 280. (IF: 1.188).

  • Pitchipoo P., and Saravanan S ., (2015) “Optimization of GMAW parameters to improve the tensile strength of welding material”, International Journal of Applied Engineering Research, Vol. 10, No.68, pp. 578-581.

  • Pitchipoo P., and Saravanan S ., (2015) “Optimization of GMAW parameters to improve the tensile strength of welding material”, International Journal of Applied Engineering Research, Vol. 10, No.68, pp. 578-581.

  • Pitchipoo P., Venkumar P. and Rajakarunakaran S., (2015) “Grey decision model for supplier evaluation and selection in process industry: A comparative perspective” International Journal of Advanced Manufacturing Technology, Volume 76, Issue 9-12, pp 2059-2069 (IF: 1.779).

  • D.Sudarsan., G.D.Sivakumar and D.Sudarsan, (2015), “Optimization of Kanban system using memetic algorithm”, International Journal of Applied Engineering Research, Volume 10, Number 28, pp.21800-21808.

  • Ganesan.K., Kailasanathan.C and Kumarasamy.Y (2015)“ Static analysis of composite leaf spring using Nanoclay” International Journal of Applied Engineering Reseachj, Volume 10, Number 9, pp.8022-8026.

  • M.Suresh.,and M.Dhanasekaran “Modeling and steady state heat transfer analysis of rectangular brick manufacturing chamber” International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 9, pp.7827-7833.

  • M.Suresh.,and M.Dhanasekaran and A.Ramakrishnan (2015) “Experimental and Numerical Investigation of Temperature Distribution in Rectangular Brick Manufacturing Chamber” International Journal of Applied Engineering Research, Vol. 10 No.28, pp.21809-21813.

  • Raj Gokul P, Ebenezer Sathish Paul P, and SreedharanM (2015) “Numerical Modelling of Leakage Behaviour of Seal” International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 3, pp. 147-151.

  • A.Muthiah., R.Rajkumar, 2014, ‘A comparison of artificial bee colony algorithm and genetic algorithm to minimize the makespan for job shop scheduling’ Procedia Engineering, vol 97, pp 1745 – 1754.

  • 2013-14:

  • Rajesh. S,Rajakarunakaran S.Sudhakarapandian R. and Pitchipoo P, (2013) “MOORA based Tribological Studies on Red Mud Reinforced Aluminum Metal Matrix Composites” Advances in Tribology, Volume 2013, Article ID 213914.

  • Siva I., WinowlinJappes J.T., Pitchipoo P., Amico S.C., Nagarajan E.R. and Azhagesan N. (2013) “Grey Optimization of Process Parameters of Surface Modification of Novel Coconut Sheath Reinforced Polymer Composites” Journal of Polymer Engineering, Vol. 33, No. 7, pp. 665–672. (IF: 0.282).

  • Pitchipoo P., Venkumar P. and Rajakarunakaran S., (2013) “Modeling and development of decision support system for supplier selection”, Journal of Industrial Engineering International, 9(1):23.

CONFERENCES:

  • Pitchpoo P, A.BhaskaraSethupathy and ,A.Muthiah, “Experimental Investigation Of Machinability Characteristics And Multi- Objective Optimization Of Milling In Aluminium 6061& Fly Ash Composite Using Grey Relational Analysis” International Conference on Advanced Manufacturing and Automation (INCAMA-2018), Kalasalingam University, Krishnankoil, Tamilnadu, March 05-06, 2018.

  • Mahendran K, Muthiah A, Pitchpoo P, Rajkumar R, “Firefly Algorithm For Solving Job Shop Scheduling Problem” International Conference on Advanced Manufacturing and Automation (INCAMA-2018), Kalasalingam University, Krishnankoil, Tamilnadu, March 05-06, 2018.

  • Karthikeyan R, Pitchpoo P, “An artistic approach to the selection of process parameters variables for the FDM process” International Conference on Advanced Manufacturing and Automation (INCAMA-2018), Kalasalingam University, Krishnankoil, Tamilnadu, March 05-06, 2018.

  • Malleshappa T., Bhawati P, Venkumar P, Pitchpoo P, “Evaluation of green supply chain management practices in small scale forging industries” International Conference on Advanced Manufacturing and Automation (INCAMA-2018), Kalasalingam University, Krishnankoil, Tamilnadu, March 05-06, 2018.

View More